Adopting four-leads guiding system ,with high strong vibration motor and using both compression of the upper and the bottom mould enhance the productivity and quality, at the same time can adapt to the different kinds of material for various blocks.
Main technical specification:
|Molding pieces|| 390mm×190mm×190mm 4pcs/mold|
(Note:The mold according to your requirement)
|Productivity||2000-2500 pcs/day(count by quantity of per mold)|
|Power||9.7KW(Total power in the next page)|
|Vibration form||Platform vibration|
QTJ4 - 35 type electric block forming machine, the host can be operated independently, also can be equipped with a belt conveyor, a pipeline
mixer. The host comprises a vibration source, transmission, lifting, pushing, hopper, die electric control box system.
Lifting system: compose of cycloid pin motor, sprockets, lift arm, axle sleeve and hanging pin, positioning pin.
the cycloid pin motor with 1.5 kilowatt driven spindle at both ends of crank arm. Lift and lower the mold in parallel driven by the lift arm, The upper mold and beam hanging by both sides, balanced in the positioning plate. Hanging from the upper mold.make upper mold leave the molding box smoothly.
Vibration system: under vibration compose of two set vibrator combination with 3KW. vibration above formed by a 1.5KW vibrator up and down.