Fully Automatic Block Equipment Aerated Concrete Aerated Block Machine Aerated Block Machine Manufacturer Aerated Board Production Line

  Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production LineHigh technology for AAC: 1.500kg/m3,600kg/m3,700kg/m3 2.Raw material :sand or fly ash 3.Its weight is 1/4 concrete4.ISO/CE 1.light weight .Areated concrete density is usually 400-700kg/

Featured Products

  Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line


High technology for AAC:
1.500kg/m3,600kg/m3,700kg/m3
2.Raw material :sand or fly ash
3.Its weight is 1/4 concrete
4.ISO/CE


Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line


Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line


1.light weight .Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay block and  1/5 common concrete.So use the Light block can reduce the weight of the build more,and also reduce the  beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.

2.keeping temperature .It has many are porous,the delivery hearting coefficient is 0.9-0.22W/(mk),the same as  1/4 or 1/5 of clay brick,so it is best  materials now in the world.


AAC light weight block machine 

 

1. Product weight is according to 600kg/m3 to control.2. water and material rate 0.631
3 .annual capacity 200,000M3.

 

4. one mould product 2.88M3

5. Set raw  material proportion: cement 6.5%, raw lime 23%, flyash 68%, gypsum 3%, aluminum paste powder 350g/M3.6. Casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes.
7.casting slurry temperature 38-42 degree8 .body quiet stop. Time is 1.5-2.5housr, temperature 50-90 degree, after quiet stop body strength is 0.15-0.18Mpa
9 .Steam curing cycle time, come in and out autoclave about 0.5hour, steam curing cycle time about is 6 hours/1.6Mpa, total 6.5 hours.10. Main Material:coal ash sand waste mine material coal stonestone dust and other silicon materials.





Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line

Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line

Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line




Hongfa AAC Block Production Line Introduction:

1.Our company has set up office in Vietnam,Indonesia,South Africa  and sale service station in nanning guangxi province and will ensure the matericals rapid and timely service.

2.We have successfully exported and established more than 40 sets of AAC concrete production lines in overseas. So,we have many type of business model in other countries,such as Indonesia,Myanmar,Iraq,Mongolia.You can pay a visitting to these countries and see our successful molds whenever you fell free.

3.Hongfa Machinery are the best manufactuer in producing aerated block and concrete block molding machine in China,as weFamous Trademark of China,and One of Top Ten Influential Brands in China Brick & Tile Industry.Please see the following Hongfa'Honor,and you will have a better undstanding to our company.
 
4.We have mature and rice experience to successfully help customers establish aerated concrete walls manufactuer.If you buy one set line of AAC from our company,we will give you a valued project report and detailed instrution.

 

Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line
 

Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line

Advantages of the AAC brock application

 

1. Sound proof

AAC wall has an excellent sound Transmission class (STC) ,rating of 44. Result: Virtually Soundproof Interiors

 

2. Thermal Insulation

It has highest thermal rating in the industry….R30! Thus provides well insulated interiors, keeping out warm air in summer and cold air in winters. AAC reduces Air conditioning cost by 30%.

 

3. Earthquake Resistant

Earthquake forces on structure are proportional to the weight of the building, hence AAC shows excellent resistant to earthquake forces. Regions of high seismic activity like Japan exclusively use AAC. It has been proven to withstand wind loads of category 5 tropical storms.

 

4. Floor Space Area

Use of thinner blocks (6" instead of 9" exterior walls) because of its excellent water barrier & insulation properties leads to an increase in floor space area between 3-5%.

 

5. Cost saving

Being lightweight AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 27%) and cement (up to 20%) structural cost saving. Being 8 times the size of a clay brick, AAC wall construction involves 1/3 the joints, thus an overall mortar saving up to 66%.

 

Its automatic manufacturing process gives AAC an exceptional dimensional accuracy & smooth surfaces, eliminating need of three-coat plaster walls and allows for a final 6 mm skim coat (putty/POP).

 

6. Fire Resistant

Best in class fire rating of 4 hours. The melting point of AAC is over 1600 ºc, more than twice the typical temperature in a building fire of 650 ºc.

 

7. Pest Resistant Termites hate AAC!

Being made of inorganic minerals, it does not promote growth of molds.

 

8. Water Barrier

Its structure does not allow for capillary action making it impervious to water. Its water barrier properties are further enhanced by adding silicone based additives.

 

Strength to weight ratio, higher than even M150 concrete and far exceeds the Indian Building code requirements.

 

9. Energy Efficient

AAC is 100% Green Building Material & is a walling material of choice in LEED certified buildings (ITC centre, the highest rated Green Building has been built using AAC).AAC is most energy & resource efficient in the sense that it uses least amount of energy & material per m³ of product. Unlike brick manufacturing process which uses previous top layer agricultural soil, AAC uses Fly Ash (65% of its weight), thus provides the most constructive solution to the nation's fly ash utilization problem.

Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line



Hongfa Machinery Group

Hongfa Group Established in 1990.
A leader developer& Manufacturer of Construction Material Machinery.
Main business Range & Products: 
Lightweight Panel Production Line, AAC Block Production Line, Full Automatic Concrete Block Production Line, Artificial Quartz Plate Production Line, Concrete Pipe Machine, Concrete Tile Machine, Concrete pipe machine, Bidirectional Hydraulic Brick Maker, Mining Machinery,  Concrete Batching plant,  Stereo Parking Equipment,  etc.
 
Hongfa Strengths
More than 30 years experience1500 employee (50+engineers)                   
2) Total 4 factories with 440,000M2 and annual sell above USD100 Million .                   
310,000 customers and fulfillment to over 120 countries.                    
4Continuous service and logistics system.                    
5) High quality products and competitive price.We hope we can cooperate with each other 
and establish a win-win business relationship.   
  
Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line    
                                                                   

Exhibition abroad in the next half year .   
 

Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line



Hongfa Machinery Group Main Products :

Automatic Block Making:
QT12-15D   QT12-15F  QT10-15D  QT10-15F  QT9-15 QT8-15D 
QT8-15F  QT6-15D  QT6-15C  QT6-15B  QT4-15D  QT4-15C 
QT4-15B  QT4-20C  QTJ4-25
Semi-automatic:
QTJ4-35B2  QTJ4-40B2
Semi-automatic egg-laying machine:
QTY4-30  QMJ4-45  QTJ2-45  JMQ-6A 
Color Paver Color tile forming machine:
QTF3-20   SMY8-150
HF-800 pipe-making machine  HF-2000 pipe-making machine
Concrete Mixing Plant:
HZS25  HZS35    HZS50  HZS60  HZS series
AAC Block production line : 50000~300000M3/Year

 

Automatic Building Block Equipment Aerated Concrete AAC Block Making Machine AAC Block Machine Manufacturer AAC Panel Production Line




Please not hesitate to contact us if you are interested in any kinds of products.

Contact Information:
Foreign Trade Dept. : Emily Lee
Guangxi Hongfa Heavy Machinery Co., Ltd.
What's app/We chat :+86 15177094840
Wesite: gxhongfa.en.made-in-china.com


 





 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours